Elm327

Elm327

Wireless Sensor Network (WSN) based ECU Monitoring System

Published in Rajesh Singh, Anita Gehlot, P.S. Ranjit, Dolly Sharma, Futuristic Sustainable Energy and Technology, 2022

Ankur Kohli, Aayush Vats, Subhransu Sourav Priyadarshan, Yash Pratap Singh, Bhupendra Singh

Those data to the littler scope humble which is presented in Arduino controller after every particular time those data log are been transmits to the data base which is on cloud and using EEPROM the data log will thus delete in the wake of transmitting the data to the worker. The logs comprise RPM, vehicle Speed, Heat temperature, coolant temperature, engine torque and so on in JSON plan. AT commands to configure HC05 Bluetooth Module with ELM327 OBD II Module: AT+RESETAT+ORGLAT+ROLE=1AT+CMODE=0AT+BIND=0000,00,333333AT+INITAT+PAIR=0000,00,333333AT+LINK=0000,00,333333

Gear shifting optimization applied to a flex-fuel vehicle under real driving conditions

View Article

Journal Information

Published in Mechanics Based Design of Structures and Machines, 2022

Tarsis Prado Barbosa, Jony Javorski Eckert, Ludmila Corrêa A. Silva, Leonardo Adolpho Rodrigues da Silva, Juan Carlos Horta Gutiérrez, Franco Giuseppe Dedini

A conventional passenger vehicle Nissan March (2013) 1.0 was used for data acquisition. The vehicle was equipped with an ELM327 Bluetooth scanner system connected to the On-board Diagnostic port (OBD-II), Figure 1. Data acquisition was made in a defined path covering only urban perimeter. Vehicle speed, engine torque and speed, fuel consumption and engine load data were sampled at 0.5 Hz (Barbosa et al. 2020). The OBD-II data was added to cell phone GPS signals of altitude, latitude, longitude and time.

Explore chapters and articles related to this topic

Wireless Sensor Network (WSN) based ECU Monitoring System

Gear shifting optimization applied to a flex-fuel vehicle under real driving conditions