Research on pulse signal identification algorithms based on adaptive filter and adaptive generalized cross-correlation
Published in Systems Science & Control Engineering, 2018
Yisen Yang, Chenquan Hua, Jinglong Kan, Kai Zhang, Lu Li, Xuan Xu
The single ideal pulse signal from the pulse generator is shown in Figure 4. The waveform of the pulse signal is determined by the characteristics of the pulse generator (Emmerich et al., 2016). In this paper, the pulse generator is actually a rotary valve. Opening and closing the valve are the process of changing the channel flow area, which can produce positive pulse signals (Perry, Burgess, & Turner, 2008). Considering the low-power design of the downhole system and the characteristics of the pulse generator, opening and closing the valve create a series of momentary pressure changes, which includes rising and falling edges of the positive pulses. In accordance with this condition, the single ideal pulse signal from the pulse generator is a trapezoidal wave which has a width of 2 s.