Explore chapters and articles related to this topic
Delivering Windows Media to Your Audience
Published in Joe Follansbee, Hands-On Guide to Windows Media, 2012
Here’s the procedure for installing Windows Media Services: Click Start → Control Panel → Add/Remove Programs.Click Add/Remove Windows Components.In the “Windows Components” dialog box, highlight the Windows Media Services checkbox, as shown in Figure 8-1. In the “Windows Components” dialog box, click the “Details…” button, as shown in Figure 8-1.In the new dialog box, check all four boxes. If a warning message appears, such as the message in Figure 8-2, click OK. (You may be prompted at some point in install Internet Information Services 6.0) Click OK in the Details box.When prompted, insert the Windows Server CD-ROM into your CD-ROM drive, and click OK.In the “Completing Windows Components Wizard” box, click Finish.
Guidelines to develop demonstration models on industry 4.0 for engineering training
Published in International Journal of Computer Integrated Manufacturing, 2023
Juan J. Fuertes, Raúl González-Herbón, José R. Rodríguez-Ossorio, Guzmán González-Mateos, Serafín Alonso, Antonio Morán
The reading and writing flow is configured to centralize communication with the PLC via Modbus TCP and avoid multiple read and write requests simultaneously. Recorded data are used by the other flows. Parameterization and automatic control, manual control and vision flows use nodes that allow both processing data collected from the PLC and data entered directly by the user, and generating the appropriate Modbus response to be interpreted by the PLC. Data are entered by the user from the local monitoring and operation dashboard, a control panel capable of operating in low-cost devices. On the other hand, the safety and alarms flow collects data from the PLC to display the status of the different beacons and signalling elements available in the demonstration model. However, in this flow no data are requested from the user and no Modbus response is generated, since it is a flow intended for alarm visualization.
Re-configurable, expandable, and cost-effective heterogeneous FPGA cluster approach for resource-constrained data analysis
Published in International Journal of Parallel, Emergent and Distributed Systems, 2022
Dulana Rupanetti, Hassan Salamy, Cheol-Hong Min, Kundan Nepal
After constructing the fundamental IP design, the Perceptron IP block is added, and the bit-stream is then generated. The produced bitstream is imported into the Xilinx SDK suite, where a real-time C program is developed to interface with the host application through TCP/IP by implementing a bare-metal network protocol provided by the lWiP library. DMA access is used to transfer the data to the custom IP block. Four FPGAs were used in the experiment, which was clustered via a gigabit Ethernet switch that dynamically assigns IP addresses to connected devices. Figure 4 illustrates the resource utilisation following the modification of a single FPGA board. With the Neural Network design implemented, the Place and Route procedure in Vivado yielded a maximum clock speed of 254.3 MHz with a slack time of 12.736 ns. The cluster control panel software is shown in Figure 2(b), which also illustrates the 4-FPGA cluster connection with the Ethernet switch and a PC running the cluster control panel software.
Technology-Facilitated Intimate Partner Abuse: a qualitative analysis of data from online domestic abuse forums
Published in Human–Computer Interaction, 2021
What is more, in cases where spyware is identified, removing it may not always be the best course of action. Removing spyware effectively alerts perpetrators to victims’ knowledge of the surveillance and removes an avenue through which abuse can be carried out, which can lead to increased risk for the victim. Similarly, the post below also demonstrates how searching online for information about spyware may, in itself, be risky for victims. I’m not sure, maybe you can find tracking software in the programs/apps part of your control panel? Or can you check your firewall and see if there’s anything that you don’t recognise being allowed through? If there is tracking software then uninstalling it could make him suspicious, so be careful. Also, I don’t think Googling information about tracking software is a good idea if you think he’s tracking you. [NGOF]