China
Africa
Explore chapters and articles related to this topic
Advanced Numerical Integration
Published in Harold Klee, Randal Allen, Simulation of Dynamic Systems with MATLAB® and Simulink®, 2018
Once The Mathworks software is installed and functioning properly, the third-party software download and installation (CygwinTM and the GNU ARMTM compiler) is facilitated by a MATLAB m-file script. CygwinTM is a UNIX shell environment that runs on Windows and the GNU ARMTM compiler compiles C source code for the ARM processor that runs on the NXT. The script is available from The Mathworks’ Web site at http://www.mathworks.com by searching for “ECRobot Installer.” (ECRobot is an abbreviation for Embedded Controller Robot.) Locate the hyperlink “Download the ECRobot installer” to download (ecrobot_installer_v1_2.zip at the time). Extract the files and then follow the README.pdf instructions. The ECRobotlnstaller contains three MATLAB m-file scripts: A script “download_ecrobot_tools” to download all the necessary software. Note: Before running the script in Step 1: Automated Download of the README file, it may need to be edited to accommodate the current version of nxtOSEK.A script “install_ecrobot_tools” to configure and install the necessary software.A script “update_nxt_firmware” that updates the firmware on the NXT to run ARM binary files
Precast segmental bridge construction in seismic zones
Published in Fabio Biondini, Dan M. Frangopol, Bridge Maintenance, Safety, Management, Resilience and Sustainability, 2012
Fabio Biondini, Dan M. Frangopol
A lab-scale tendon-anchorage connection as shown in Fig. 9 was utilized to investigate the variation of impedance signatures with the loss of prestress force. A PZT-interface was installed to the tendon- anchorage connection in the same way as the model in Fig. 6. Impedance signatures of the PZT-interface were measured by an impedance sensor node Im- ote2/SSeL-I16 placed near the anchorage system. The sensor node was powered by three D-Cell batteries which ensure the power supply for the sensor node during the test. A base station which included an Imote2 associated with an interfacial board IIB2400 and a computer was placed at 5m distant from the tendon-anchorage connection. The IIB2400 provides two ports from Imote2 to the computer, one for sending command and receiving debug messages from remote node, and one for communicating data. A command-line interface, Cygwin OS (http://cygwin.com), was utilized to operate the wireless system. Also, a commercial impedance analyzer HIOKI 3532-50 was utilized to measure impedance of the PZT-interface for performance comparison with the sensor node.
Results and Discussion
Published in Amine Dahane, Nasr-Eddine Berrached, Mobile, Wireless and Sensor Networks, 2019
Amine Dahane, Nasr-Eddine Berrached
In what follows, we describe some of these simulators: Omnet ++ Website: Ref [25]Platform: Microsoft Windows (with Cygwin), UNIX.License: Free for academics and for nonprofit use.
Detailed overview of the multimodel multiproduct streamflow forecasting platform
Published in Journal of Applied Water Engineering and Research, 2020
Tirthankar Roy, Juan B. Valdés, Aleix Serrat-Capdevila, Matej Durcik, Eleonora M. C. Demaria, Rodrigo Valdés-Pineda, Hoshin V. Gupta
The MMSF platform is set up for the Linux operating system, however, it can also be run in Windows provided two main issues are addressed: The executable files used in extracting the precipitation products should be compatible with Windows.The VIC model is originally setup in Linux environment. It can also be run in Windows using some Linux emulator such as Cygwin.